What are the requirements for woodworking machinery construction

(1) Before processing, metal objects such as nails and steel wires should be removed from the wood.
(2) Before installing a dust removal device for woodworking machinery, the dust removal device should be started first, and the dust removal pipeline should not be deformed or leaked.
(3) During the operation of woodworking machinery, it is not allowed to measure the size of the workpiece and clean wood chips, shavings, and debris.
(4) During the operation of woodworking machinery, it is not allowed to cross the transmission part of the woodworking machinery. Troubleshooting and tool disassembly should be carried out after the woodworking machinery stops running and the power is cut off.
(5) When operating, appropriate cutting and feed speeds should be selected based on the material, thickness, humidity, etc. of the wood. Operators and auxiliary personnel should closely cooperate and receive and deliver materials at a synchronous and uniform speed.
(6) When using multifunctional woodworking machinery, only one function should be used, and devices with other functions should not hinder operation.
(7) After the operation, the power should be cut off, the brake box should be locked, and cleaning and lubrication should be carried out.
(8) The noise of woodworking machinery should not exceed the noise limit of the construction site boundary; When the noise of woodworking machinery exceeds the limit, noise reduction measures should be taken. Woodworking machinery operators shall wear personal protective equipment as required.